Yarn Tensile Test: Aim, Principle, Apparatus and General Procedure
Original exam-oriented notes on the basic tensile-testing principle. The actual test length, speed and specimen count must follow the laboratory standard and instrument method.
YARN TENSILE TEST – EASY EXAM NOTES
1. Aim
- To determine the breaking force and extension behaviour of a yarn specimen.
2. Principle
- A yarn specimen is held between two clamps.
- The tester applies an increasing tensile force.
- The force and extension are measured until the specimen breaks, according to the selected test method.
3. Apparatus
- Yarn tensile testing machine (for example, a suitable constant-rate-of-extension tester).
- Specimen clamps or jaws.
- Test-length and speed setting facilities provided by the instrument.
4. General procedure
- Condition the yarn as required by the applicable test method.
- Set test length, speed and other parameters according to the relevant standard and instrument manual.
- Clamp the yarn carefully without unwanted slack or damage.
- Start the test; the machine applies tensile force.
- Record breaking force and extension at break.
- Repeat for the required number of specimens and calculate/report results as specified by the method.
5. Common result terms
- Breaking force: force at which the yarn breaks; commonly expressed in newtons (N), subject to the selected method.
- Elongation at break: extension at the breaking point, often expressed as a percentage.
- Tenacity: breaking force relative to yarn linear density; its unit depends on the count system and reporting convention.
6. Factors affecting results
- Fibre type and fibre properties.
- Yarn count and twist.
- Moisture and conditioning atmosphere.
- Test length, speed, specimen preparation and clamping.
- Instrument condition and calibration.
Important: There is no single universal test setting. Use the exact standard prescribed by your laboratory; these notes are a learning summary, not a replacement for the standard.
Offline study
Save this published learning material on this device. It will be available offline until you remove it or clear browser storage.
Sign in to bookmark this resource and track your learning progress.
Course
Diploma / B.Tech
Branch
Textile Technology
Semester
General revision
Subject
Textile Testing – Yarn Strength
Source
EduIndia original notes; NPTEL Evaluation of Textile Materials (IIT Delhi)