Weaving Basics: Warp, Weft and the Main Loom Motions
Original EduIndia notes introducing woven-fabric formation, the three primary loom motions and the basic secondary motions. NPTEL Fabric Manufacture-I is provided as the supporting course reference.
WHAT IS WEAVING?
Weaving is the interlacement of two sets of yarns, usually at right angles, to produce a woven fabric. The lengthwise yarns are called warp and the crosswise yarns are called weft.
BASIC TERMS
• Warp: Yarns running in the length direction of the fabric.
• Weft: Yarns inserted across the width of the fabric.
• Shed: The opening formed by separating warp yarns into two layers.
• Fell of cloth: The line where the newly inserted weft is pushed into the fabric.
• Selvedge: The finished edge along the lengthwise sides of woven fabric.
THREE PRIMARY MOTIONS
1. Shedding: Separates warp threads to form a shed for weft insertion. It may be produced by tappet/cam, dobby or jacquard mechanisms.
2. Picking / weft insertion: Inserts the weft yarn through the shed. Depending on loom type, insertion may use a shuttle, projectile, rapier, air jet or water jet.
3. Beat-up: The reed pushes the inserted pick towards the fell of cloth, helping place the weft at the required position.
SECONDARY MOTIONS
• Let-off: Supplies warp from the warp beam at a controlled rate.
• Take-up: Withdraws the woven cloth at a controlled rate and helps control pick density.
• Warp stop motion: Stops the loom when a warp end breaks, where fitted.
BASIC SEQUENCE
The loom forms a shed → inserts a pick → beats the pick to the fell. This cycle repeats while let-off and take-up maintain the required warp supply and fabric take-up.
EXAM TIP
Remember the primary motions as S-P-B: Shedding, Picking, Beat-up. Let-off and take-up are important secondary motions.
Offline study
Save this published learning material on this device. It will be available offline until you remove it or clear browser storage.
Sign in to bookmark this resource and track your learning progress.
Course
Diploma / B.Tech
Branch
Textile Technology
Semester
General revision
Subject
Weaving Technology
Source
EduIndia original notes; NPTEL Fabric Manufacture-I