Cotton Spinning: Process Sequence and Purpose of Each Machine
Original EduIndia revision notes explaining a typical carded cotton route. The overview draws on the NPTEL courses for opening/carding/drawing and for roving preparation/ring spinning. This is not an official board syllabus.
COTTON SPINNING – BASIC IDEA
Spinning is the process of converting textile fibres into yarn of the required count and quality. In a conventional cotton ring-spinning mill, fibres are cleaned, opened, straightened, blended and converted into a continuous yarn.
PROCESS FLOW (typical carded route)
Bale opening and mixing → Blow room → Carding → Drawing (usually more than one passage) → Speed frame / Simplex → Ring frame → Winding.
1. Bale opening and mixing: Cotton from different bales is opened into small tufts and mixed. The aim is to obtain a reasonably uniform fibre blend.
2. Blow room: Tufts are opened further and larger trash particles are removed. Excessive beating can damage fibres, so cleaning must be balanced with fibre preservation.
3. Carding: The card separates fibre tufts into individual fibres, removes a portion of impurities and short fibres, and forms a sliver. It is often described as the heart of spinning.
4. Drawing: Several slivers are combined and drafted. This improves evenness and fibre blending; the output remains a sliver.
5. Speed frame / Simplex: The sliver is attenuated to a finer roving and a small amount of twist is inserted so that it can be handled by the ring frame.
6. Ring frame: Roving is drafted to the final yarn size, twist is inserted, and yarn is wound onto a cop.
7. Winding: Yarn is transferred to a package suitable for later processes. Yarn clearing can remove selected objectionable faults, depending on the machine settings.
IMPORTANT EXAM POINTS
• Sliver is the output of carding and drawing.
• Roving is the output of the speed frame.
• Yarn is produced at the ring frame.
• The exact process route changes with fibre type, yarn quality target and spinning system. A combed route includes additional preparation and combing stages; it should not be confused with the basic carded route.
REMEMBER: Blow room cleans and opens; carding individualises; drawing equalises; speed frame makes roving; ring frame makes yarn; winding makes a usable package.
Offline study
Save this published learning material on this device. It will be available offline until you remove it or clear browser storage.
Sign in to bookmark this resource and track your learning progress.
Course
Diploma / B.Tech
Branch
Textile Technology
Semester
General revision
Subject
Spun Yarn Manufacturing
Source
EduIndia original notes; NPTEL Yarn Manufacture I and Principles of Combing, Roving Preparation & Ring Spinning (IIT Delhi)